bzx384-v-g-series www.vishay.com vishay semiconductors rev. 1.2, 22-nov-11 1 document number: 83335 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 small signal zener diodes features ? silicon planar power zener diodes ? the zener voltages are graded according to the international e 24 standard ? standard zener voltage tolerance is 5 %; replace c with b for 2 % tolerance ? aec-q101 qualified ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec note ** please see document vishay material category policy: www.vishay.com/doc?99902 primary characteristics parameter value unit v z range nom. 2.4 to 75 v test current i zt 2; 5 ma v z specification pulse current int. construction single ordering information device name ordering code taped units per reel minimum order quantity bzx384-v-g-series bzx384-v-g-series-18 10 000 (8 mm tape on 13" reel) 10 000/box bzx384-v-g-series bzx384-v-g-series-08 3000 (8 mm tape on 7" reel) 15 000/box package package name weight molding compound flammability rating moisture sensitivity level soldering conditions sod-323 4 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit power dissipation device on fiberglass substrate p tot 200 mw junction to ambient air valid that electrodes are kept at ambient temperature r thja 650 k/w junction temperature t j 150 c storage temperature range t stg - 65 to + 150 c
bzx384-v-g-series www.vishay.com vishay semiconductors rev. 1.2, 22-nov-11 2 document number: 83335 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 electrical characteristics (t amb = 25 c, unless otherwise specified) part number marking code zener voltage range test current reverse leakage current dynamic resistance temperature coefficient of zener voltage v z at i zt1 i zt1 i zt2 i r at v r z z at i zt1 z zk at i zt2 vz at i zt1 v ma a v 10 -4 /c min. nom. max. max. typ. typ. min. max. bzx384c2v4-v-g y1 2.2 2.4 2.6 5 1 50 1 70 ( 100) 275 - 9 - 4 bzx384c2v7-v-g y2 2.5 2.7 2.9 5 1 20 1 75 ( 100) 410 ( 600) - 9 - 4 bzx384c3v0-v-g y3 2.8 3.0 3.2 5 1 10 1 80 ( 95) 425 ( 500) - 9 - 3 bzx384c3v3-v-g y4 3.1 3.3 3.5 5 1 5 1 85 ( 95) 400 ( 480) - 8 - 3 bzx384c3v6-v-g y5 3.4 3.6 3.8 5 1 5 1 85 ( 90) 80 ( 400) - 8 - 3 bzx384c3v9-v-g y6 3.7 3.9 4.1 5 1 3 1 85 ( 90) 40 ( 150) - 7 - 3 bzx384c4v3-v-g y7 4 4.3 4.6 5 1 3 1 80 ( 90) 30 ( 80) - 6 - 1 bzx384c4v7-v-g y8 4.4 4.7 5 5 1 3 2 50 ( 80) 30 ( 80) - 5 2 bzx384c5v1-v-g y9 4.8 5.1 5.4 5 1 2 2 40 ( 60) 40 ( 80) - 3 4 bzx384c5v6-v-g ya 5.2 5.6 6 5 1 1 2 15 ( 40) 40 ( 100) - 2 6 bzx384c6v2-v-g yb 5.8 6.2 6.6 5 1 3 4 6 ( 10) 50 ( 150) - 1 7 bzx384c6v8-v-g yc 6.4 6.8 7.2 5 1 2 4 6 ( 15) 50 ( 150) 2 7 bzx384c7v5-v-g yd 7 7.5 7.9 5 1 1 5 6 ( 15) 50 ( 150) 3 7 bzx384c8v2-v-g ye 7.7 8.2 8.7 5 1 0.7 5 6 ( 15) 50 ( 170) 4 7 bzx384c9v1-v-g yf 8.5 9.1 9.6 5 1 0.5 6 6 ( 15) 50 ( 200) 5 8 bzx384c10-v-g yg 9.4 10 10.6 5 1 0.2 7 8 ( 20) 50 ( 200) 5 8 bzx384c11-v-g yh 10.4 11 11.6 5 1 0.1 8 10 ( 20) 50 ( 225) 5 9 bzx384c12-v-g yi 11.4 12 12.7 5 1 0.1 8 10 ( 25) 60 ( 225) 6 9 bzx384c13-v-g yk 12.4 13 14.1 5 1 0.1 8 10 ( 30) 60 ( 250) 7 9 bzx384c15-v-g yl 13.8 15 15.6 5 1 0.05 0.7 v znom. 10 ( 30) 60 ( 250) 7 9 bzx384c16-v-g ym 15.3 16 17.1 5 1 0.05 0.7 v znom. 10 ( 40) 65 ( 300) 8 9.5 bzx384c18-v-g yn 16.8 18 19.1 5 1 0.05 0.7 v znom. 10 ( 45) 70 ( 300) 8 9.5 bzx384c20-v-g yo 18.8 20 21.2 5 1 0.05 0.7 v znom. 15 ( 55) 75 ( 325) 8 10 bzx384c22-v-g yp 20.8 22 23.3 5 1 0.05 0.7 v znom. 20 ( 55) 80 ( 350) 8 10 bzx384c24-v-g yr 22.8 24 25.6 5 0.5 0.05 0.7 v znom. 25 ( 70) 80 ( 350) 8 10 bzx384c27-v-g ys 25.1 27 28.9 2 0.5 0.05 0.7 v znom. 25 ( 80) 85 ( 375) 8 10 bzx384c30-v-g yt 28 30 32 2 0.5 0.05 0.7 v znom. 30 ( 80) 85 ( 375) 8 10 bzx384c33-v-g yu 31 33 35 2 0.5 0.05 0.7 v znom. 35 ( 80) 85 ( 400) 8 10 bzx384c36-v-g yw 34 36 38 2 0.5 0.05 0.7 v znom. 35 ( 90) 100 ( 425) 10 12 bzx384c39-v-g yx 37 39 41 2 0.5 0.05 0.7 v znom. 60 ( 100) 100 ( 450) 10 12 bzx384c43-v-g yy 40 43 46 2 0.5 0.05 0.7 v znom. 70 ( 100) 150 ( 475) 10 12 bzx384c47-v-g yz 44 47 50 2 0.5 0.05 0.7 v znom. 70 ( 100) 170 ( 500) 10 12 bzx384c51-v-g z1 48 51 54 2 0.5 0.05 0.7 v znom. 40 ( 90) 410 ( 600) 8 10 bzx384c56-v-g z2 52 56 60 2 0.5 0.05 0.7 v znom. 50 ( 90) 425 ( 500) 10 12 bzx384c62-v-g z3 58 62 66 2 0.5 0.05 0.7 v znom. 60 ( 100) 400 ( 480) 10 12 bzx384c68-v-g z4 64 68 72 2 0.5 0.05 0.7 v znom. 70 ( 100) 80 ( 400) 10 12 bzx384c75-v-g z5 70 75 79 2 1 0.05 0.7 v znom. 70 ( 100) 40 ( 150) 10 12
bzx384-v-g-series www.vishay.com vishay semiconductors rev. 1.2, 22-nov-11 3 document number: 83335 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 electrical characteristics (t amb = 25 c, unless otherwise specified) part number marking code zener voltage range test current reverse leakage current dynamic resistance temperature coefficient of zener voltage v z at i zt1 i zt1 i zt2 i r at v r z z at i zt1 z zk at i zt2 vz at i zt1 v ma a v 10 -4 /c min. nom. max. max. typ. typ. min. max. bzx384b2v4-v-g c1 2.35 2.4 2.45 5 1 50 1 70 ( 100) 275 - 9 - 4 bzx384b2v7-v-g c2 2.65 2.7 2.75 5 1 20 1 75 ( 100) 300 ( 600) - 9 - 4 bzx384b3v0-v-g c3 2.94 3.0 3.06 5 1 10 1 80 ( 95) 325 ( 600) - 9 - 3 bzx384b3v3-v-g c4 3.23 3.3 3.37 5 1 5 1 85 ( 95) 350 ( 600) - 8 - 3 bzx384b3v6-v-g c5 3.53 3.6 3.67 5 1 5 1 85 ( 90) 375 ( 600) - 8 - 3 bzx384b3v9-v-g c6 3.82 3.9 3.98 5 1 3 1 85 ( 90) 400 ( 600) - 7 - 3 bzx384b4v3-v-g c7 4.21 4.3 4.39 5 1 3 1 80 ( 90) 410 ( 600) - 6 - 1 bzx384b4v7-v-g c8 4.61 4.7 4.79 5 1 3 2 50 ( 80) 425 ( 500) - 5 2 bzx384b5v1-v-g c9 5 5.1 5.2 5 1 2 2 40 ( 60) 400 ( 480) - 3 4 bzx384b5v6-v-g ca 5.49 5.6 5.71 5 1 1 2 15 ( 40) 80 ( 400) - 2 6 bzx384b6v2-v-g cb 6.08 6.2 6.32 5 1 3 4 6 ( 10) 40 ( 150) - 1 7 bzx384b6v8-v-g cc 6.66 6.8 6.94 5 1 2 4 6 ( 15) 30 ( 80) 2 7 bzx384b7v5-v-g cd 7.35 7.5 7.65 5 1 1 5 6 ( 15) 30 ( 80) 3 7 bzx384b8v2-v-g ce 8.04 8.2 8.36 5 1 0.7 5 6 ( 15) 40 ( 80) 4 7 bzx384b9v1-v-g cf 8.92 9.1 9.28 5 1 0.5 6 6 ( 15) 40 ( 100) 5 8 bzx384b10-v-g cg 9.8 10 10.2 5 1 0.2 7 8 ( 20) 50 ( 150) 5 8 bzx384b11-v-g ch 10.8 11 11.2 5 1 0.1 8 10 ( 20) 50 ( 150) 5 9 bzx384b12-v-g ci 11.8 12 12.2 5 1 0.1 8 10 ( 25) 50 ( 150) 6 9 bzx384b13-v-g ck 12.7 13 13.3 5 1 0.1 8 10 ( 30) 50 ( 170) 7 9 bzx384b15-v-g cl 14.7 15 15.3 5 1 0.05 0.7 v znom. 10 ( 30) 50 ( 200) 7 9 bzx384b16-v-g cm 15.7 16 16.3 5 1 0.05 0.7 v znom. 10 ( 40) 50 ( 200) 8 9.5 bzx384b18-v-g cn 17.6 18 18.4 5 1 0.05 0.7 v znom. 10 ( 45) 50 ( 225) 8 9.5 bzx384b20-v-g co 19.6 20 20.4 5 1 0.05 0.7 v znom. 15 ( 55) 60 ( 225) 8 10 bzx384b22-v-g cp 21.6 22 22.4 5 1 0.05 0.7 v znom. 20 ( 55) 60 ( 250) 8 10 bzx384b24-v-g cr 23.5 24 24.5 5 1 0.05 0.7 v znom. 25 ( 70) 60 ( 250) 8 10 bzx384b27-v-g cs 26.5 27 27.5 2 0.5 0.05 0.7 v znom. 25 ( 80) 65 ( 300) 8 10 bzx384b30-v-g ct 29.4 30 30.6 2 0.5 0.05 0.7 v znom. 30 ( 80) 70 ( 300) 8 10 bzx384b33-v-g cu 32.3 33 33.7 2 0.5 0.05 0.7 v znom. 35 ( 80) 75 ( 325) 8 10 bzx384b36-v-g cw 35.3 36 36.7 2 0.5 0.05 0.7 v znom. 35 ( 90) 80 ( 350) 8 10 bzx384b39-v-g cx 38.2 39 39.8 2 0.5 0.05 0.7 v znom. 40 ( 130) 80 ( 350) 10 12 bzx384b43-v-g cy 42.1 43 43.9 2 0.5 0.05 0.7 v znom. 45 ( 150) 85 ( 375) 10 12 bzx384b47-v-g cz 46.1 47 47.9 2 0.5 0.05 0.7 v znom. 50 ( 170) 85 ( 375) 10 12 bzx384b51-v-g d1 50 51 52 2 0.5 0.05 0.7 v znom. 60 ( 180) 85 ( 400) 10 12 bzx384b56-v-g d2 54.9 56 57.1 2 0.5 0.05 0.7 v znom. 70 ( 200) 100 ( 425) 9 11 bzx384b62-v-g d3 60.8 62 63.2 2 0.5 0.05 0.7 v znom. 80 ( 215) 100 ( 450) 9 12 bzx384b68-v-g d4 66.6 68 69.4 2 0.5 0.05 0.7 v znom. 90 ( 240) 150 ( 475) 10 12 bzx384b75-v-g d5 73.5 75 76.5 2 0.5 0.05 0.7 v znom. 95 ( 255) 170 ( 500) 10 12
bzx384-v-g-series www.vishay.com vishay semiconductors rev. 1.2, 22-nov-11 4 document number: 83335 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 basic characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward characteristics fig. 2 - admissible power dissipation vs. ambient temperature fig. 3 - dynamic resistance vs. zener current fig. 4 - dynamic resistance vs. zener current fig. 5 - dynamic resistance vs. zener current fig. 6 - thermal differential resistance vs. zener voltage 18114 ma 10 3 10 2 10 -1 10 -2 10 -3 10 -4 10 -5 10 1 i f v f 0 0.2 0.4 0.6 0.8 1 v t j = 100 c t j = 25 c 18192 250 200 150 100 50 0 mw p tot 0 100 200 c t am b 18117 1000 5 4 3 2 5 4 3 2 100 1 r zj 0.1 25 25 110 i z t j = 25 c 2.7 5 4 3 2 10 25 100 ma 3.6 4.7 5.1 5.6 18119 100 5 4 3 2 5 4 3 2 10 r zj 0.1 25 25 110 i z 1 25 100 ma t j = 25 c 33 27 22 18 15 12 10 6.8/8.2 6.2 18120 10 3 7 5 4 3 2 7 5 4 3 2 10 0.1 2345 2345 110 ma r zj i z t j = 25 c 47 + 51 43 39 36 10 2 18121 10 3 5 4 3 2 5 4 3 2 10 2 1 r zth 5 4 3 2 10 k/w 1 2345 2345 10 100 v v z at i z = 5 ma negati v e positi v e v z t j r zth = r tha x v z x
bzx384-v-g-series www.vishay.com vishay semiconductors rev. 1.2, 22-nov-11 5 document number: 83335 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - dynamic resistance vs. zener voltage fig. 8 - temperature dependence of zener voltage vs. zener voltage fig. 9 - change of zener vo ltage vs. junction temperature fig. 10 - change of zener voltage vs. junction temperature fig. 11 - temperature dependence of zener voltage vs. zener voltage fig. 12 - change of zener voltage from turn-on up to the point of thermal equilibrium vs. zener voltage 18122 100 7 5 4 3 2 7 5 4 3 2 1 r zj 10 t j = 25 c i z = 5 ma 1 2345 2345 10 100 v v z 18135 25 20 15 10 5 0 - 5 m v /c v z t j 1 2345 2345 10 100 v v z at i z = 5 ma v 27 v , i = 2 ma 5 ma 1 ma 20 ma i z = 18124 v z at i z = 5 ma 25 15 10 8 7 6.2 5.9 5.6 5.1 4.7 3.6 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 - 1 - 0.2 v z v t j 020406080 100 120 140 c 18194 9 7 5 3 1 - 1 v v z 8 6 4 2 0 0 100 60 t j 20 40 120 80 140 c i z = 2 ma 51 43 36 v z at i z = 2 ma 18195 100 80 60 40 20 0 m v /c v z t j 0 20 40 80 60 100 v v z at i z = 2 ma i z = 5 ma 18196 1.6 1.2 0.8 0.4 0 - 0.4 v v z 1.4 1 0.6 0.2 - 0.2 1 2345 2345 10 100 v v z at i z = 5 ma i z = 5 ma v z 27 v ; i z = 2 ma v z = r zth x i z
bzx384-v-g-series www.vishay.com vishay semiconductors rev. 1.2, 22-nov-11 6 document number: 83335 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 13 - change of zener voltage from turn-on up to the point of thermal equilibrium vs. zener voltage fig. 14 - breakdown characteristics fig. 15 - breakdown characteristics fig. 16 - breakdown characteristics 18160 5 4 3 2 1 0 v v z 0 20 40 60 80 100 v v z at i z = 5 ma i z = 5 ma i z = 2.5 ma v z = r zth x i z u rrent i z 5 ma 1 23456789 0 10 v v z 3.3 3.9 5.6 2.7 ma 50 40 30 20 10 0 l z t j = 25 c 8.2 6.8 4.7 18112 10 20 30 0 40 v v z ma 30 20 10 0 l z 33 test c u rrent i z 5 ma t j = 25 c 10 12 15 18 22 27 36 18191 ma 10 8 6 4 2 0 l z 10 20 30 40 50 60 70 80 90 0 100 v v z 2 ma test c u rrent i z t j = 25 c 43 51 47 39
bzx384-v-g-series www.vishay.com vishay semiconductors rev. 1.2, 22-nov-11 7 document number: 83335 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters (inches): sod-323 foot print recommendation: rev. 5 - date: 23. s ept.2009 17443 document no.: s 8-v-3910.02-001 (4) 0.6 (0.024) 0.6 (0.024) 0.6 (0.024) 1.6 (0.063) 0.10 (0.004) cathode bar 0.20 (0.008) 0.40 (0.016) 2.50 (0.098) 1.1 (0.043) 1.5 (0.059) 2.85 (0.112) 1.60 (0.063) 1.95 (0.077) 0.15 (0.006) 0.1 (0.004) max. 1.15 (0.045) 0.8 (0.031) created - date: 24.augu s t.2004 0.40 (0.016) 0.25 (0.010) 0.2 (0.008) 0 to 8
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
